1994-2001 Acura Integra Innovative Billet Conversion Mount Kit, Aluminum (K-Series/Manual) - 75A BLK (Silver)

Conversion Billet Engine Mount Kit for the 1992-1995 Honda Civic (EG/EH/EJ) & 1994-2001 Acura Integra (DC)
Designed to fit the stock automatic or manual Honda EG/EH/EJ & Acura Integra DC chassis when performing a K-Series engine conversion with manual transmission.

- Hardware Included
- Unique No-Tear Vibration Minimizing Bushings
- Optional Bushing Stiffness'
- Positions the Engine With No Axle Bind
- Bolt-On
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty

IMPORTANT:
- Innovative Mounts transmission side-bracket mounts only with manual transmissions that come in the 02+ Civic Si, Rs-X or Integra. If you are installing a K24, you will need to purchase an additional engine bracket from Honda. This bracket is needed in order for the passenger mount to properly bolt up to the k24 engine. (Honda p/n: 11910-PPA-000)

- Works with S-Type transmission.

- For Right Hand Drive(RHD) applications, please see: 92-95 CIVIC WELD-ON BRACKET (K-SERIES / RIGHT HAND DRIVE) - RHD-SB

It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).

PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.

Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.

Also Available:
- K-Series Fuel Rail - B52050

This Kit is Also Available in Steel (90150)

Weight: 26lbs

This Kit Includes
1) Transmission Mount - B10110
1)Transmission Mounting Bracket B90110-SB
2) 12 x 1.25 x 65
1) 12 x 1.25 x 40
3) 12 x1.25 x 30
6) 12mm Washers

1) Engine Block Mount - B90120
1) Engine Block Mounting Bracket - 90120-SB
1) 12 x 1.25 x 100
2) 10 x 1.25 x 150
2) 12mm Washers
4) 10mm Washers
1) 12mm Nut
2) 10mm Nuts

1) Rear Engine Mount - B90130
1) Rear Engine Mounting Bracket - 90130-SB
1) 12 x 1.25 x 110
2) 12mm Washers
1) 12mm Nut

NOTE: Most items are special ordered and may take up to 2-3 weeks