2015+ Subaru WRX Mishimoto Thermostatic Oil Cooler Kit - Black

Subaru WRX Thermostatic Oil Cooler Kit, 2015+

Mishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit thermostatic oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. This 2015 WRX kit is designed to replace the stock liquid-to-liquid with a Mishimoto Sandwich Plate with Rear-Mounted Thermostat, which includes a built-in thermostat with a 185°F / 85°C activation temperature.

Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your 2015 WRX engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific silicone liquid-to-liquid heat exchanger bypass hose provides a clean look in the engine bay. This 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your WRX can achieve a 20+°F (11.1+°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Thermostatic Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. And like all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty

• Direct fit for the 2015+ Subaru WRX
• Proven 20+°F (11.1+°C) drop in oil temperature
• Full bolt-on oil cooling solution for street and track vehicles
• No modification necessary for installation
• Billet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature
• 19-row oil cooler strategically mounted in the lower grille for maximum airflow
• CNC-machined aluminum spacer for the oil sandwich plate
• Silicone hose bypasses stock liquid-to-liquid heat exchanger
• Includes preassembled stainless steel braided oil lines with -10AN fittings
• Cooler available in Sleek Silver or Stealth Black
• Increases oil capacity by 0.75 qt
• This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit
• Mishimoto Lifetime Warranty

Mishimoto Automotive, the world leader in performance cooling products, is proud to introduce you to the thermostatic oil cooler kit universal for the 2015+ Subaru WRX. Fe...
FITS
15+ Subaru WRX

INCREASE IN OIL CAPACITY
0.75 Quarts (0.701 L)

TEMPERATURE DROPS
20+°F (11.1+°C)

PURCHASE INCLUDES
(2) Application-Specific Mounting Brackets
(1) 19-Row Oil Cooler (Silver or Black)
(1) 4ft Stainless Steel Braided Hose w/ 45° and 90° -10AN Fittings
(1) 5ft Stainless Steel Braided Hose w/ 45° and 90° -10AN Fittings
(1) M20 Thermostatic Sandwich Plate
(1) 15mm CNC Sandwich Plate Spacer, Black
(1) Application-Specific Stainless Steel M20 Sandwich Plate Adapter
(1) Silicone Liquid-to-Liquid Heat Exchanger Bypass Hose, Black
(2) Banjo Fitting w/ Bolt M20 x -10AN, Black
(2) Large O-ring
(1) Mounting Hardware Set
Mishimoto Lifetime Warranty ENGINE CODES
FA20DIT

CHASSIS CODES
VA

NOTE
This product fits both manual and CVT transmission vehicles.

Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit

CAUTION
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.