2000-2009 Honda S2000 Megan Racing Rear Driveshaft Spacer

2000-2009 Honda S2000 Megan Racing Rear Driveshaft Spacer

Megan Racing driveshaft spacer is utilized to help restore the proper angle for your axle after you have lowered your vehicle. When you lower your vehicle using lowering springs or coil over kits, the axles are stretched which causes your ball joints to wear down at a faster rate. These spacers prevent any increased wear and tear which would be caused by an improper axle length and angle from your lowered vehicle. It is recommended that you use lock tight or lock washers to ensure that the bolts do not come loose.

Specifications:

• SCM435, Grade 12.9 hardware
• Protect your axle shaft with a lowered suspension
• Correct the angle of your axle shaft
• Torque spec for 12x bolts included - 30 lb-ft
• 4 pieces per set

All Megan Racing products are deemed for "off-road use only"-- please reference your local state vehicle code regulations regarding imposed modification laws.

Please call us to stock check first.