2005-2010 Scion tC SPC Rear Control Arm, Single Arm

This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides +/- 1.25 deg. This factory change is not enough for lowered vehicles. By increasing the length of the rear upper control arm SPC Performance adds 2 deg. positive camber to the rear suspension that can then be dialed in with the OEM cam bolt.

 

Rear Adjustment range: (Includes the camber adjustment built-in from the factory)

Camber -3.25 degree to +3.25 degree

Installation time: .5 hr/side

Required: 1 per wheel