2010+ Honda PCX 125 NCY Variator Set Special Gold Teflon Pulley 1200-1190

This Set increases acceleration and lowers the vibration that is characteristic of the factory Honda PCX variator.

PRODUCT SPECIFICATIONS

 Includes the following Variator, Variator ramp plate (top), and Variator slides.

•    1x Alumin-Alloy Housing Teflon Coated ID: 24mm / OD: 116.84mm / H: 37.74mm

•    1x Metal Top ID: 15mm / OD: 90mm / H: 20.74mm

•    3x Plastic Slides (black) ID: 7<8.4mm / L: 22mm / W: 15mm / H: 12.3mm

•    Made in Taiwan

•    Fit Variator Shaft Shims: 24mm / Nut: M14/ Washer: M14 / Drive Spline: 28 / Socket: 22mm

•    Fit 6x Roller Weights: 20x15mm

•    Fit Dowel Pin Set (8x10mm)

•    Fit Belt Size: 816, 836-22-30

•    Fit PCX 125/150cc+

PRODUCT FITMENTS

NCY Variator 117mm Coated Gold Set for Honda PCX 125/150cc and Honda SH125i/SH150i.

PRODUCT INSTALLATION

1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 

2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 

3. Then install the existing variator fan, washer, and hand-tight nut. 

4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.