Series 2 Plug & Play Engine Management System for Honda V6 J-motor swaps (J30, J32, J35 & J37)
AEM's Series 2 EMS is a complete engine control system that plugs into the factory harness and uses the factory sensors. This means you do not need to replace any parts of the harness or sensors, just plug the EMS into the harness and begin tuning! This Series 2 EMS was designed specifically for J-motor swaps, and allows you to control every aspect of your J-series motor. From VTEC to rev limit, timing, adding different sized injectors, boost control, nitrous injection, even anti-lag and individual cylinder fuel and timing trims, the Series 2 EMS gives you total control from an easy to use interface.
The 30-6051 can be used with the following engine harnesses: 1999-2002 Accord V6 J30A1
1999-2003 3.2TL/CL J32A1
2002-2003 3.2TL/CL TypeS J32A2
2002-2004 Odessey 3.5L J35A4
The following engines are useable: 1999-2002 Honda Accord V6 from a J30A1
1999-2003 3.2TL/CL J32A1/J30A
2002-2003 3.2TL/CL Type S J32A2
2002-2004 Honda Odyssey 3.5L J35A4
The following transmissions are useable: 5-Speed Manual
6-Speed Manual
Note: Does NOT support Automatic transmissions!
