1992-1993 Acura Integra ACT Xtreme Pressure Plate w/ Solid Hub (4 Pad) Disk Clutch Kit

92-93 Acura Integra ACT Xtreme Pressure Plate w/ Solid Hub (4 Pad) Disk Clutch Kit


ACT Clutch Kit

After spending long hours and thousands of dollars building that high powered engine, you need a quality clutch that can properly transfer that power into motion. Count on ACT clutches for quality, performance and affordability.

ACT recognizes that every driver and engine set-up is unique, so a variety of complete clutch kits and components are offered to match virtually any situation. ACT's complete clutch kits include a pressure plate, disc, release bearing, and (in most cases) a pilot bearing and alignment tool. Torque capacities are provided for every clutch combination. When a specific flywheel is required for an ACT Clutch, it will be designated in the chart for your convenience.

Consider carefully which clutch is right for your car. First you need a clutch that will hold all the power, but not too excessive. For street use, you also need a long lasting clutch that has a positive feel, smooth engagement and quiet operation. For racing, you need a tough clutch that will enable quick shifts and hard slips all the way to the finish line.



Xtreme Pressure Plate
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety

Solid Hub (4 Pad) Friction Disk
Recommended for Street and Race, Quicker engagement, Quiet operation, Best organic friction material, improved hub and burst strength

Specifications:
Torque Capacity (ft/lbs):408
Clamp Load Increase:100%


Shipping is always included in the price you see inside the 48 lower United States.