• Adjustable front/back throw from 20-50% below stock.
• Anodized billet aluminum & stainless steel construction.
• Sealed ball bearings for reduced friction.
• 1" of height adjustability.
• Silver zinc plated springs.
• Stainless steel hardware.
We intend for this to be the best EP3 shifter in the world and will be incorporating all of the features and experiences gained over the past decade from our RSX, K-Swap, and 8th gen shifters. The shifter will have an unparalleled level of adjustability so that each driver can tweak every aspect of the shifter to suit your needs. Ultimately, what we develop will be a durable and versatile short shifter that is simple to install and takes your shifting to the next level.
The shifter's frame will be constructed from TIG welded, powder coated, 1000 Series steel. The upper, lower and side rocker assemblies will be made from a single piece of 6061 aluminum, and feature custom sealed ball bearings to reduce friction and require less physical effort to row through gears.
Shift throw adjustment is achieved using two threaded cable attachment pins allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin pivot cap for sturdy, quiet operation. The shifter will also use zinc-plated extension springs replacing the OEM style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently. At the highest setting, you can expect a 20% reduction in throw and at the lowest setting up to a 50% reduction in throw.
You will also be able to set the height and orientation of the shifter rod. Our simple single-bolt height adjustment design (borrowed from our new 8th civic shifters) allows the knob to be adjusted higher or lower than stock (within a 1" range) with only a 5mm allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions to your exact needs.